Main
Home  :  Support  :  Answers  :  8.2i ML410 - Some ML410 boards, after initial power on, illuminate the 1.8V (DS1) LED Red

8.2i ML410 - Some ML410 boards, after initial power on, illuminate the 1.8V (DS1) LED Red

AR# 24806

Search For Another Answer
Topic ML410 Board
Last Updated 02/22/2007
Status Active
Description

Keywords: ML410, demo, development, AT, form, factor, board, Virtex-4, DDR2

Some ML410 boards, after initial power on, illuminate the 1.8V (DS1) LED Red. This identifies that there is an issue with the regulation of the 1.8V DDR2 supply.

Solution

It is recommended that you cycle the ATX board power to clear the fault, thus restoring the 1.8V (DS1) LED to Green (Okay) status.
 
 
/csi/footer.htm