Main
Home  :  Support  :  Answers  :  LogiCORE RapidIO v4.1 - When targeting Virtex-5 or Virtex-II Pro X, x1 Core is unable to train when connected to x4 Core

LogiCORE RapidIO v4.1 - When targeting Virtex-5 or Virtex-II Pro X, x1 Core is unable to train when connected to x4 Core

AR# 24838

Search For Another Answer
Topic Coregen RapidIO
Last Updated 04/27/2007
Status Active
Description

Keywords: v4.1, ip1_i, serial, high, speed, high-speed, PHY, logical, design environment, rio, rapidio, rapid, io, MGT, 9.1i, ip update, 9.1i

For Virtex-II Pro and Virtex-5 cores, a 1x link is unable to train when connected to a 4x link. It will only occasionally train when connected to a 4x core, unless the 4x Core is forced into 1x mode.

Solution

This issue is addressed in a patch.
Please see (Xilinx Answer 25118).
 
 
/csi/footer.htm