We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24895

9.1i iMPACT - Virtex-5 BPI mode Erase / Program / Verify operation fails in iMPACT


When using iMPACT to operate on the BPI device from a Virtex-5 device, the following operation will produce errors: "Erase / Program / Verify" all selected at the same time.


To work around this issue, use each operation separately.  


This issue will be fixed in a future release of the design tools, but the fix has not been scheduled.

AR# 24895
Date Created 09/04/2007
Last Updated 05/21/2014
Status Archive
Type General Article