We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24934

9.2i Install - ISE Release Notes Known Issues


The ISE 9.2i Release Notes packaged with your ISE shipment or found on the Electronic Fulfillment site contain installation instructions, system requirements, and other general information about ISE 9.2i.

This Known Issues Answer Record is a supplement to the 9.2i Release Notes and contains links to information on known issues in the software that might be resolved in service packs or future versions.


ISE General

(Xilinx Answer 25226) - 9.2i ISE - On Windows 64-bit platforms, the ".ise" project file has an incorrect windows file association

CORE Generator

(Xilinx Answer 25227) - 9.2i CORE Generator - Synthesis of the opb_usb2_device core results in the following error: "Exception in thread 'main' com.xilinx.sim.exception.ElaborationException."

(Xilinx Answer 25330) - 9.2i CORE Generator - IP Availability in 9.1i initial release


(Xilinx Answer 25310) - 9.2i ISE Simulator - Known Issues with ISE Simulator


(Xilinx Answer 25307) - 9.2i Timing Analysis - Dropped paths with multiple through points

(Xilinx Answer 25308) - 9.2i Timing Analysis Virtex-5 - In DDR component, only the rising or falling OFFSET constraints are analyzed

(Xilinx Answer 25309) - 9.2i Timing Analyzer - Cannot copy from HTML version of Timing Report
AR# 24934
Date Created 09/04/2007
Last Updated 03/09/2012
Status Archive
Type General Article