We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24966

LogiCORE RapidIO v4.1 - When generating a core, the CORE Generator and/or ISE Project Navigator window might close


When generating a Serial Rapid IO v4.1 Core, the core fails to generate and might cause Project Navigator to close without any error. If you look in the project directory, you might find the "coregen.log" file, and it might indicate the following error:

"For ordering information, please refer to the

product page for this component on www.xilinx.com

FLEXlm Error: No such feature exists. (-5,21)

ERROR:Xst:1484 - A core is unlicensed!"


This problem is seen due to the missing IP license file. The default "simulation-only Evaluation" license was supposed to be delivered with the IP Update; however, it was not included in the IP Update #1 for 9.1i.

A patch is available to address this issue.

Please see (Xilinx Answer 25118).

AR# 24966
Date Created 09/04/2007
Last Updated 12/15/2012
Status Active
Type General Article