Keywords: genace, PPC, ml410, virtex 4, virtex 4 FX
I get the error below when issuing the following XMD command with .bit and .elf files located in the same directory.
Invocation:
xmd -tcl genace.tcl -hw download.bit -elf vxWorks_0 vxWorks_1 -ace ml410_dual_vxworks.ace -board ml410
#######################################################################
XMD GenACE utility. Generate SystemACE File from bit/elf/data Files
#######################################################################
Target Type not defined for Processor 1, Using default Target Type ppc_hw
GenACE Options:
Board : ml410
Jtag Devs : xc4vfx60
FPGA pos : 1
JPROG : false
HW File : download.bit
ACE File : ml410_dual_vxworks.ace
nCPUs : 1
Processor ppc_hw_1 Information
Debug opt : -debugdevice devicenr 1 cpunr 1
ELF files : vxWorks_1
Start PC Address : 0x00010000
############################################################
Converting Bitstream 'download.bit' to SVF file 'download.svf'
Executing 'impact -batch bit2svf.scr'
Copying download.svf File to ml410_dual_vxworks.svf File
Scan Chain Failed
JTAG chain configuration
--------------------------------------------------
Device ID Code IR Length Part Name
1 001eb409 14 xc4vfx60
ERROR(0):
Error: can't read "elffile": no such variable