UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 25228

9.2i CORE Generator - Generating the Serial RapidIO Core in batch mode causes a segmentation fault

Description

Keywords: rapid, SRIO, command line

Generating the Serial RapidIO Core in batch mode causes a segmentation fault.

For example, running "coregen -b srio_v4_1.xco" results in the following message:

"Regenerating IP...
WARNING:sim:89 - A core named <srio_v4_1> already exists in the output directory. Output products for this core may be overwritten.

Segmentation fault (core dumped) command returned with 0"

Solution

To generate (or regenerate) this core, you must use the CORE Generator GUI.

This problem has been fixed in the latest 9.2i Service Pack available at:
http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp
The first service pack containing the fix is 9.2i Service Pack 1.
AR# 25228
Date Created 09/04/2007
Last Updated 04/08/2009
Status Archive
Type General Article