UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 25240

10.1 ChipScope Pro - "ERROR:ChipScope:No Xilinx Environment Found!"

Description

When attempting to open ChipScope Pro Core Inserter, the following error occurs:

"ERROR:ChipScope:No Xilinx Environment Found!"

Solution

This error occurs when you are using a 32-bit ISE install with a 64-bit ChipScope install. You cannot mix 32-bit and 64-bit installs of ISE and ChipScope since they are not compatible. To work around this issue, make sure that both the ChipScope and ISE installs are either 32-bit or 64-bit.

Alternatively, adding multiple entries in the $Xilinx environment variable causes the Core Inserter to error out with the same message. To work around this issue, verify that your $Xilinx environment variable exists and is part of the $PATH.

AR# 25240
Date Created 10/28/2007
Last Updated 12/15/2012
Status Active
Type General Article