| AR# | 25314 |
| Part | EDK-FlashWriter |
| Last Modified | 2008-05-14 00:00:00.0 |
| Status | Active |
| Keywords | XPS [[CR 438166?]] |
Keyword: XPS
When I program flash in XPS, the following error occurs:
"Error Message:
---------------------------------------
Info:Connecting to cable (Parallel Port - LPT1).
Info:Checking cable driver.
Info: Driver windrvr6.sys version = 8.1.0.0.Info: WinDriver v8.10 Jungo (c)
1997 - 2006 Build Date: Aug 15 2006 X86 32bit SYS 14:21:34, version = 810.
Info: LPT base address = 0378h.
Info: ECP base address = 0778h.
Info: ECP hardware is detected.
Info:Cable connection established.
Info:Connecting to cable (Parallel Port - LPT1) in ECP mode.
Info:Checking cable driver.
Info: Driver xpc4drvr.sys version = 1.0.4.0.Info: LPT base address = 0378h.
Info: Cable Type = 1, Revision = 0.
Info: Setting cable speed to 5 MHz.
Info:Cable connection established.
Connected to MDM UART Target
Connected to "mb" target. id = 0
Starting GDB server for "mb" target (id = 0) at TCP port no 1234 done.
* Opening image file to be programmed...done.
* Setting up Flashwriter sources for compilation...
Error Executing xmd Script : C:/EDK/data/xmd/flashwriter.tcl Error :: syntax error in expression "0xSTDIN & ~0x3": extra tokens at end of expression
Done!"
