We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 25324

9.2i Floorplanner - "FATAL_ERROR:GuiUtilities:Gq_Application.c:578:1.17"


When I try to assign a package pin in Floorplanner on my Virtex-5 design, the following error occurs:

"FATAL_ERROR:GuiUtilities:Gq_Application.c:578:1.17-This application has discovered an exceptional condition from which is cannot recover. Process will terminate. For more information on this error, please consult the Answers Database or open a WebCase with this project attached at http://www.xilinx.xom/support."

When is this issue going to be fixed?


This problem has been fixed in the latest 9.2i Service Pack available at:

The first service pack containing the fix is 9.2i Service Pack 1.

AR# 25324
Date Created 09/04/2007
Last Updated 12/15/2012
Status Active
Type General Article