AR #2561 - ModelSim (MTI) - How do I compile the Xilinx Simulation Libraries for ModelSim for ISE 6.1 and earlier versions of ISE?
ModelSim (MTI) - How do I compile the Xilinx Simulation Libraries for ModelSim for ISE 6.1 and earlier versions of ISE?
| AR# | 2561 |
| Part | SW-compxlib |
| Last Modified | 2008-11-18 00:00:00.0 |
| Status | Archive |
| Keywords | VCOM, VLOG, SimPrim, LogiBLOX, UniSim, VHDL, Verilog, VSIM |
Description
Keywords: VCOM, VLOG, SimPrim, LogiBLOX, UniSim, VHDL, Verilog, VSIM
Urgency: Standard
General Description:
How do I compile the Xilinx Simulation Libraries for ModelSim for ISE 6.1 and earlier versions of ISE?
NOTE: For MXE, do not manually compile the libraries. Download the latest available MXE libraries at: http://support.xilinx.com/support/mxelibs/
Solution 1
Xilinx 6.1i, 5.2i, 5.1i SoftwareUse CompXLib to compile the libraries. For information on using CompXLib , see (Xilinx Answer 15338).
In 6.1i, CompXLib works on Linux.
In the 5.1i/5.2i software Linux is not supported. For 5.1i/5.2i, use the following TCL script when running ModelSim on Linux:
ftp://ftp.xilinx.com/pub/swhelp/mti/xilinx_lib_5.tar.gz
Solution 2
Xilinx 4.1i/4.2i SoftwareA TCL script is available on the Xilinx FTP site. This script works with the SE and PE versions of ModelSim.
NOTE: The TCL script does not compile the VHDL Smart Models.
PC:
ftp://ftp.xilinx.com/pub/swhelp/mti/xilinx_lib_4.zip
Unix:
ftp://ftp.xilinx.com/pub/swhelp/mti/xilinx_lib_4.tar.gz