We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2747

Foundation Schematic: Can I add my own company logo to a Foundation schematic onto the border or table?


Keywords: logo, schematic, border, table, title, block

Urgency: Standard

General Description:
Is it possible to add a company logo to a Foundation schematic
onto the border or table? Some customer may want to add their
own logo or graphics onto the schematic of a Foundation


This is possible if the logo or graphic is in the (.wmf) or
Windows Metafile Format, without the header. A Windows Metafile
can be created using programs such as Coreldraw.

To load the logo onto the schematic do the following:

From the schematic editor, select File->Table Setup, then in
the Logo Metafile section you can browse to find the .WMF file.
Click 'Apply', then 'OK'.

The logo will appear just above the Title Block in the lower
right hand corner of the schematic sheet.

Note: The logo may become distorted from the tool forcing the
graphic to fit into a pre-specified area.
AR# 2747
Date Created 09/02/1997
Last Updated 08/12/2003
Status Archive
Type General Article