UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2772

FATAL_ERROR:basnc:basncsignal.c:262:1.61 mapping with -k switch

Description

FATAL_ERROR:basnc:basncsignal.c:262:1.61 - Could not find a bel for a signal on pin C1 of comp u0/u1/u1/modgen_0_ax_duplicate_name_0_CINt.

The error is dependent on use of the -k switch
(map to 5-input functions)

Solution

For this particular case, map runs okay when the -k switch
is not used. There are other known cases of this Fatal Error
that are unrelated to the -k switch. If the error message
mentions "pin C1" there is a good chance the the -k switch
is involved.
AR# 2772
Date Created 08/31/2007
Last Updated 10/06/2008
Status Archive
Type General Article