UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29036

8.1i ECS - Schematic LUT1 doesn't allow INIT=1

Description

Keywords: ECS, Schematics, LUT1, INIT

INIT attribute can have values 0, 1, 2, 3 for LUT1. However ECS is not accepting any value other than 0.

Solution

You can workaround this problem by setting the INIT constraint in the UCF file.

This problem is fixed in ISE 8.2i.

[!< ENGINEERING REVIEW:
Pending CR #225273.
____________________________________________________
>!]
AR# 29036
Date Created 07/23/2007
Last Updated 02/26/2008
Status Archive
Type General Article