We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29190

9.2i Schematic - When I first open a schematic in the work space it appears blank


When I open a schematic in Project Navigator I cannot see any image in the work space.

This can occur with schematic design source files, or RTL and Technology view schematics. It has also occurred when I was re-docking a floating schematic window.


The problem is caused by an inconsistency in the Zoom-Full feature of the Schematic Editor/Viewer.

You can circumvent this problem by initiating any action that adjusts the schematic view, such as clicking the Zoom In or Zoom Out button in the Project Navigator toolbar.

This issue is resolved in the ISE 10 software release.

AR# 29190
Date Created 08/16/2007
Last Updated 10/02/2015
Status Active
Type General Article
  • ISE - 9