We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29223

9.1i EDK SP1 - hard_temac - C_RGMII_RX_CLK_DELAY parameter is not set correctly between MPD and Data Sheet


According to the Hard TEMAC Data Sheet, the C_RGMII_RX_CLK_DELAY parameter has a default value of '0'. However, in the MPD file it is defined as ' C_RGMII_RX_CLK_DELAY = NOT_SET'.


Please refer to the Hard TEMAC Data Sheet for setting C_RGMII_RX_CLK_DELAY parameter when used with RGMII interface. The correct value can be added to hard_temac in the MHS for the setting the delay value.

AR# 29223
Date Created 09/04/2007
Last Updated 05/22/2014
Status Archive
Type General Article