When generating the hardware or simulation files for a MPMC EDK design, I receive the following error, even when not using XCL PIMs. How do I resolve it?
Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...
ERROR:MDT - issued from TCL procedure "check_wr_fifo" line 12
mpmc0 (mpmc) -
Port 1 cannot be configured to be Read-Only when C_XCL1_WRITEXFER > 0.
Running UPDATE Tcl procedures for OPTION SIMGEN_SYSLEVEL_UPDATE_PROC...
To work around this issue, set the C_XCL<portnum>_WRITEXFER parameter to 0 for the port that fails the error.
PARAMETER C_XCL1_WRITEXFER = 0
Also, if using read-only ports, be sure to set the MPMC training port to a writeable PIM port; in this case, PIM #4.
PARAMETER C_WR_TRAINING_PORT = 4
This issue is planned to be fixed in EDK 10.1i.