UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29709

9.2i EDK SP1 - XPS_UARTLITE default baud rate set to 128,000

Description

When adding an XPS_UARTLITE from the IP Libraries, it defaults to 128,000 baud. This default setting is incorrect. Default should probably be set either to 115,200 or 9600.

Solution

The issue will be fixed in EDK 9.2i SP2 and will be available at:  

http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp 

AR# 29709
Date Created 11/03/2007
Last Updated 05/22/2014
Status Archive
Type General Article