We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29748

LogiCORE v1.0 Cascaded Integrator Comb Compiler (CIC Compiler) - What do the fields in the Frequency Response Analysis Options in the GUI affect?


On page 2 of the CIC Compiler GUI, there is a section titled "Frequency Response Analysis Options" with the fields "Passband Range" and "Stopband Range". What does changing these values affect?


These fields do not affect the behavior of the resulting filter. These fields are used to obtain magnitude details of different ranges in the normalized sampling frequency range shown in the frequency plot.  


The minimum and maximum magnitude over the specified range is shown below the frequency plot in the GUI under the headings "Passband Configuration" and "Stopband Configuration". 


- Please See (Xilinx Answer 29297) for a detailed list of LogiCORE Cascaded Integrator Comb Compiler (CIC Compiler) Release Notes and Known Issues.

AR# 29748
Date 05/22/2014
Status Archive
Type General Article
Page Bookmarked