We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29758

ISE - The ISE tools do not run on a network using Attachmate WRQ Reflection software


When attempting to install or run ISE tools on a machine with Attachmate WRQ Reflection network software, nothing happens.


This is a known issue with Reflection network mount software. To work around the issue, you can disable the automount feature in the NFS Utility by following these steps:

1. Right-click "My Network Places" and choose "About Reflection NFS..."

2. Select View->Settings -> Authentication.

3. Assuming you are using NIS, select the NIS tab and uncheck "Enable automount."

4. Reboot the system
AR# 29758
Date Created 05/19/2008
Last Updated 04/30/2012
Status Archive
Type General Article