UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29771

ChipScope Pro: The bus plot viewer position does not align with the trigger position

Description

When an offset is set on a Trigger condition in the waveform it is not carried over to the bus view in ChipScope Pro Analyzer.

Solution

The Data will be the same in both the bus and waveform views but the offset is not consistent.

AR# 29771
Date Created 05/15/2008
Last Updated 05/22/2014
Status Archive
Type General Article