We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 298

XDE: Converting an XACT 5 lca file to pre-XACT 5 format.


To convert an lca file create with XACT 5 to the old format,
which is compatible with software versions prior to XACT5,
start XACT 5.0 with the command:

xact -lcaver=1

And load the design. If you then save the design, it will be put out
in a version 1 LCA file, which should be readable in previous versions.

* Don't invoke XACT with the XDE.BAT file: the batch file doesn't pass
this option name correctly and XACT fails.

AR# 298
Date Created 08/31/2007
Last Updated 03/31/1997
Status Archive