UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29852

10.1 EDK, MPMC v4.00.a - Memory details in MPMC GUI are not updating on CUSTOM part choice

Description

Keyword: DDR2, values, MHS  

 

When I change the memory part from CUSTOM to another predefined part in MPMC GUI, some of the memory part settings are incorrect.

Solution

This is an issue with the MPMC settings GUI. When moving from a CUSTOM memory to a memory part, the values in the GUI are not updated. This issue will be fixed in EDK 10.1, Service Pack 1. 

 

To work around this issue, remove the instance of MPMC and insert it again from the IP catalog. Next, set the memory to the target part, or select a similar part before selecting CUSTOM.

AR# 29852
Date Created 12/06/2007
Last Updated 05/22/2014
Status Archive
Type General Article