UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29888

10.1 Timing Analyzer - TCL command 'set_query' hangs on Virtex-II design

Description

When I run the xtclsh in ISE with the following command lines, it hangs: 

 

% timing_analysis open freqm.ise 

% timing_analysis new query -name q1 

% timing_analysis set q1 analysis_type net 

% timing_analysis set_query q1 "net_name" -ld 3 -hf 3

Solution

You can work around this problem by querying the net and doing timing analysis in the standalone mode of Timing Analyzer. 

This problem will be fixed in a future release of the design tools.

AR# 29888
Date Created 03/24/2008
Last Updated 05/22/2014
Status Archive
Type General Article