We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 29917

9.2i EDK SP2 - MicroBlaze v7.00. An interrupt can occur after interrupts have been disabled


An interrupt can occur after interrupts have been disabled, which results in not disabling interrupts. Interrupts are enabled again when returning from the interrupt handler.


The issue has been fixed for the MicroBlaze v7.00.b and it is available in the EDK 9.2i Service Pack 2 at:  


AR# 29917
Date Created 12/10/2007
Last Updated 05/22/2014
Status Archive
Type General Article