UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!
Page Bookmarked
  1. Xilinx - All Programmable
  2. Support
  3. AR# 29933: 9.2.04i - Direct SPI configuration problems with iMPACT when the "Erase before Programming" option is disabled

AR# 29933

9.2.04i - Direct SPI configuration problems with iMPACT when the "Erase before Programming" option is disabled

Description

When I set the "Erase before Programming" option to false (default is true) in the Program Properties for direct programming of my SPI memory in iMPACT, Verify fails at address 0.

Solution

This is a known issue only for 9.2.04i.

You can work around this problem by leaving the "Erase before Programming" option ticked (default).

This problem is fixed in 10.1, and not present in earlier 9.2i service packs.

AR# 29933
Date 12/15/2012
Status Active
Type General Article