AR #30017 - 10.1 Floorplan Editor/Timing Analyzer CrossProbing - The Clock and Data Paths for an OFFSET constraint do not connect
10.1 Floorplan Editor/Timing Analyzer CrossProbing - The Clock and Data Paths for an OFFSET constraint do not connect
| AR# | 30017 |
| Part | SW-Timing Analyzer/TRCE |
| Last Modified | 2009-06-30 00:00:00.0 |
| Status | Active |
| Keywords | crossprobe, bufg, register |
Description
Keywords: crossprobe, bufg, register
When I cross-probe from an OFFSET constraint and I select the Data Path and Clock Path, the two paths shown in Floorplan Implemented do not connect. The Data Path shows the complete path, but the Clock Path goes only to the BUFG.