We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30017

10.1 Floorplan Editor/Timing Analyzer CrossProbing - The Clock and Data Paths for an OFFSET constraint do not connect


When I cross-probe from an OFFSET constraint and I select the Data Path and Clock Path, the two paths shown in Floorplan Implemented do not connect. The Data Path shows the complete path, but the Clock Path goes only to the BUFG.


This is scheduled to be fixed in the next major release of the software.

AR# 30017
Date Created 02/22/2008
Last Updated 05/20/2014
Status Archive
Type General Article