We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30031

9.2i MAP, SmartGuide - "FATAL_ERROR:Pack:pktbaguide.c:450: - Unable to find load frag ..."


When I use SmartGuide with my design, the MAP phase fails while guiding LUTRAM slice packing. Is this a known problem?

Running directed packing...

Constraining slice packing based on guide NCD.

FATAL_ERROR:Pack:pktbaguide.c:450: - Unable to find load frag

TXH4_MST_1/bank1_ram/mem.I_4.SLICEM_F. Process will terminate. For more

information on this error, please consult the Answers Database or open a

WebCase with this project attached at http://www.xilinx.com/support.


This problem has been identified and fixed for ISE version 10.1. Meanwhile, a patch is available for ISE version 9.2i sp4.

Windows 32-bit

To install, unzip in the Xilinx install directory while maintaining directory structure.

Linux 32-bit

To install:

cd $Xilinx

tar zxvf 92isp4_map_lin_30031.tar.gz

Linux 64-bit

To install:

cd $Xilinx

tar zxvf 92isp4_map_lin64_30031.tar.gz

AR# 30031
Date Created 01/15/2008
Last Updated 12/15/2012
Status Active
Type General Article