We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30183

ChipScope Pro - Must my ChipScope and ISE versions match?


Do the versions of ISE and ChipScope that are used have to match up?


In general, the version of ChipScope (up to the service pack) must be the same as the version of ISE installed on your system.

For example, version ISE 9.2 SP1 = ChipScope 9.2 SP1 and ISE 9.2 SP2 = ChipScope 9.2 SP2, etc., are tested, no other combinations.

You may not see "ChipScope Definition and Connection File" when you attempt to add "new source" in ISE if the versions are incompatible.

AR# 30183
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked