We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30223

10.1 ChipScope Pro - Release Notes and Known Issues


Keywords: alert, readme, 92, LogiCORE ICON (ChipScope Pro - Integrated Controller), LogiCORE VIO (ChipScope Pro - Virtual Input/Output), LogiCORE ATC2 (ChipScope Pro - Agilent Trace Core 2)

The ISE 10.1 Release Notes packaged with your ISE shipment, or found on the Electronic Fulfillment site, contain installation instructions, system requirements, and other general information about ISE 10.1, including ChipScope Pro.

This Known Issues Answer Record is a supplement to the 10.1 Release Notes and contains links to information on known issues in the design tools that might be resolved in service packs or future versions.


(Xilinx Answer 30200) - 10.1 ChipScope Pro - Touching any key on keyboard causes hard application error in smartheap SHSMP.DL
(Xilinx Answer 30202) - 10.1 ChipScope Pro - Core Inserter does not launch from shortcut
(Xilinx Answer 30203) - 10.1 ChipScope Pro - When I generate my ICON Core, error occurs: "ERROR:NgdBuild:756 - "../cs/icon.ncf" Line 1: Could not find net(s)"
(Xilinx Answer 30217) - 10.1 iMPACT/ChipScope/System Generator/XMD - Platform Cable USB cable disconnects with "DeviceDetach: received detach for device handle 0x........? message
(Xilinx Answer 30230) - 10.1 ChipScope Pro - ChipScope cannot find cable drivers when using the cs_server, and error occurs: "ERROR: Failed to open Xilinx Platform USB Cable"
(Xilinx Answer 30231) -10.1 ChipScope Pro - Error message: "Driver installation failed. Please check the <Install Destination Directory>/.xinstall/install.log for more information on the cause of the failure"
(Xilinx Answer 30232) - 10.1 ChipScope Pro - ISE cannot find ChipScope Pro tools
(Xilinx Answer 30283) - 10.1 ChipScope Pro/ISE - "ERROR:LIT:266/267/296407/409/456" or "ERROR:Maplib"occurs during Implementation if ChipScope cores are present
(Xilinx Answer 30284) - 10.1 ChipScope Pro - ILA tool in FPGA Editor cannot find my ChipScope ILA Core
(Xilinx Answer 30472) - 10.1 ChipScope Pro - Creating PlanAhead project when source files contain ChipScope cores results in "FATAL_ERROR:Portability:basutformat.c:146:1.19"
(Xilinx Answer 30473) - 10.1 ChipScope iBERT Core generator: when generating an iBERT core a "ERROR:NgdBuild:28 - Top-level input design file..." message appears
(Xilinx Answer 30474) - 10.1 ChipScope Pro - Running ChipScope Core Inserter or analyzer from ISE results in "Error: Unable to find ChipScope Exe at <File Path>"

AR# 30223
Date Created 02/07/2008
Last Updated 04/16/2009
Status Active
Type General Article