We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30272

9.2i Floorplan Editor - Floorplan Editor does not read IOStandard constraints


In the UCF, there are LOC and IOStandard constraints. These constraints are not shown in the DOL when I launch FPE from Assign Package Pins or Create Area Group.


This works if you use the Post Synthesis process. However, if you run the Pre-Synthesis process, the constraints are not displayed in FPE.

AR# 30272
Date Created 02/22/2008
Last Updated 05/20/2014
Status Archive
Type General Article