We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30278

10.1 Floorplanner - S3AN200 FT256 pin locations shown incorrectly in Floorplan View


The FT256 package shows the pins in the top left corner of the die in the incorrect locations. C1 and C2 are shown on the top side in Floorplanner and on the left in Floorplan Editor, PACE, and PlanAhead.


This problem has been fixed in the latest 10.1 Service Pack available at: 

The first service pack containing the fix is 10.1 Service Pack 1.

AR# 30278
Date Created 02/22/2008
Last Updated 05/22/2014
Status Archive
Type General Article