UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30292

10.1 EDK - "ERROR:MDT - IPNAME:xps_iic HW_VER:1.00.a - Can not find valid MPD..."

Description

When I migrate a 9.1i or 9.2i design that contains an IIc core to 10.1, the following error occurs:

"ERROR:MDT - IPNAME:xps_iic HW_VER:1.00.a - Can not find valid MPD

INFO:MDT - Check the following for possible causes of not finding MPD:

- If HW_VER is specified in MHS, it must follow literal form X.YY.Z

- There is no Ip with given name

- Ip exists but not that version

- Ip (directory) exists but 2.1.0 MPD file is not available

- Ip exist in myip directory (only pcores is supported)

INFO:MDT - Check the following for possible causes of not finding MPD:

- If HW_VER is specified in MHS, it must follow literal form X.YY.Z

- There is no Ip with given name

- Ip exists but not that version

- Ip (directory) exists but 2.1.0 MPD file is not available

- Ip exist in myip directory (only pcores is supported)"

Solution

To work around this issue, manually modify the MHS file as follows:

1. Open the project's MHS file in a text editor.

2. Find the IIC instantiation in the MHS (similar to the following):

BEGIN xps_iic

PARAMETER INSTANCE = xps_iic_0

PARAMETER HW_VER = 1.00.a

PARAMETER C_BASEADDR = 0xffffffff

PARAMETER C_HIGHADDR = 0x00000000

BUS_INTERFACE SPLB = mb_plb

END

3. Change 1.00.a to 2.00.a

4. Save and Close the MHS file.

AR# 30292
Date Created 02/14/2008
Last Updated 12/15/2012
Status Active
Type General Article