Main

LogiCORE RapidIO - Message packet has incorrect treq_byte_count

AR# 30320

Search For Another Answer

Topic IP-RapidIO-Serial
Last Updated 02/22/2008
Status Active
Description

Keywords: endpoint, serial, high, speed, high-speed, PHY, logical, design environment, SRIO, RIO, rapid, rapidio, IO, MGT, 10.1, I/O, CORE, Generator, physical, logicalio, transport, buffer, mgt, messaging, message, messages, target, request, byte, count, treq_byte_count

For messaging packets, the byte count seen on treq interface is incorrect.

Solution

This issue will be fixed in SRIO v4.4 Core, expected for release on late May 2008.

If you need a patch for this, please open a Technical WebCase at:
http://www.xilinx.com/support/clearexpress/websupport.htm
Have the Technical Support Engineer contact the RapidIO expert.
 
 
/csi/footer.htm