UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 3034

Foundation Simulator: How to print a specific range of the simulation waveform

Description

Keywords: print, foundation logic simulator, range, waveform

Urgency: Standard

General Description:

If you select "File" -> "Print..." from the Foundation
simulator, you will notice that in the Print pop-up box, the
"Print Range" indicates "All" and the other options are grayed
out. How can a user print the current page or a range of
simulation results?

Solution

1) Select FILE -> Page Setup...
2) At the bottom of the pop-up box select either "current page"
or "From"
3) If "From" is selected indicate the range (decimals are
truncated)
4) Select "OK"
5) Select FILE -> Print -> OK

You will notice that, in the Print pop-up box, the "Print
Range" still indicates "All" and the other options are grayed
out. This cannot be changed, but, the range indicated in the
earlier steps will be printed.
AR# 3034
Date Created 11/04/1997
Last Updated 08/12/2003
Status Archive
Type General Article