UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30371

10.1 Floorplan Editor - Area Group ranges are incorrectly written

Description

When I create an Area Group Range in Floorplan Editor, it places all the RANGE constraints in one line, but they are ignored.

Solution

To work around this issue, manually edit the UCF and distribute the RANGE values into separate lines in the UCF. 

 

Example 

 

The following is not correct: 

 

AREA_GROUP "AG_u3" RANGE = SLICE_X79Y76:SLICE_X74Y73, DSP48_X0Y30:DSP48_X0Y30; 

 

The following is correct: 

 

AREA_GROUP "AG_u3" RANGE = SLICE_X79Y76:SLICE_X74Y73; 

AREA_GROUP "AG_u3" RANGE = DSP48_X0Y30:DSP48_X0Y30; 

 

This problem has been fixed in the latest 10.1 Service Pack available at: 

http://www.xilinx.com/support/download/index.htm
The first service pack containing the fix is 10.1 Service Pack 3.

AR# 30371
Date Created 02/24/2008
Last Updated 05/22/2014
Status Archive
Type General Article