We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30401

LogiCORE Block Memory Generator v2.7 - GUI crashes with certain Write Depth and Write Width values


[**[Hold for ISE 10.1 SP 3]] 

Within certain range selections for Write Depth and Write Width, the Block Memory Generator core customization GUI can crash. 


For example, the issue occurs in the following situations: 


- When Port A Write Depth A = 9011200, the above error occurs in the GUI console and the GUI crashes if any value between 239 and 470 is placed in the Write Width A text box and all other parameters are left as default values. 

- If Port A Write Depth = 4505600, the above error occurs in the GUI console and a range from 477 to 953 in Write Width A causes the GUI to crash with all other parameters set to the default.


This issue has been fixed in ISE 10.1 IP Update 3.

AR# 30401
Date 05/20/2014
Status Archive
Type General Article
Page Bookmarked