We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30885

10.1 iMPACT - Improving Indirect BPI programming times


Indirect programming of my BPI Flash using iMPACT takes a long time. How can I improve this?


To improve Indirect BPI programming times, increase the Programming Cable Speed.

Output -> Cable Setup -> TCK Speed/Baud Rate -> Max Speed.

There will be a change to the programming algorithm used in iMPACT 10.1 SP2 that will also reduce indirect programming times.

AR# 30885
Date Created 05/01/2008
Last Updated 12/15/2012
Status Active
Type General Article