We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 30968

10.1 EDK - Base System Builder (BSB) does not properly connect a second MPMC for a DDR2


When you build a design in Base System Builder targeting a board with 2 DDR2 memories (requiring 2 MPMC cores), BSB will not connect the mpmc_clk0_div2 to the second MPMC.


This problem has been fixed in the latest 10.1 Service Pack, available at: 

The first service pack containing the fix is 10.1 Service Pack 2.

AR# 30968
Date 05/22/2014
Status Archive
Type General Article
Page Bookmarked