Main
Home  :  Support  :  Answers  :  11.1 System Generator for DSP - Why do I receive the message "xledkpostgen>PLBPcoreBuilder at 234" when I netlist the EDK PCORE design from System Generator?

11.1 System Generator for DSP - Why do I receive the message "xledkpostgen>PLBPcoreBuilder at 234" when I netlist the EDK PCORE design from System Generator?

AR# 31068

Search For Another Answer
Topic SW-SysGen
Last Updated 04/15/2009
Status Active
Description

Keywords: EDK, XPS, SysGen, FSL, PLB

When I attempt to generate my EDK PCORE, it stops and gives the following error:

"xledkpostgen>PLBPcoreBuilder at 234"

Why does this occur?

Solution

This message occurs if the EDK project cannot be found in the specified location, which can happen if you have moved the System Generator model to a different machine.

To resolve this error, open the EDK Processor block and browse to the proper location of the EDK System ".xmp" file.
 
 
/csi/footer.htm