UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31068

11.1 System Generator for DSP - Why do I receive the message "xledkpostgen>PLBPcoreBuilder at 234" when I netlist the EDK PCORE design from System Generator?

Description

When I attempt to generate my EDK PCORE, it stops and gives the following error:  

 

"xledkpostgen>PLBPcoreBuilder at 234" 

 

Why does this occur?

Solution

This message occurs if the EDK project cannot be found in the specified location, which can happen if you have moved the System Generator model to a different machine.  

 

To resolve this error, open the EDK Processor block and browse to the proper location of the EDK System ".xmp" file.

AR# 31068
Date Created 05/28/2008
Last Updated 05/22/2014
Status Archive
Type General Article