UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31076

10.1 Floorplan Editor - PACE opens instead of the integrated Floorplanner for Automotive Spartan-3A DSP designs when launching any "Floorplan" process

Description

When launching any of the "Floorplan" processes from Project Navigator in ISE, PACE opens for an Automotive Spartan-3A DSP design rather than the integrated Floorplanner.

Solution

This issue is resolved in the 10.1 Service Pack 3. To work around the issue, follow these steps: 

 

1. Open the integrated Floorplanner. 

2. Load the design or, alternatively, you can change the target part to a non-automotive version of Spartan-3A DSP for floorplanning. 

 

This problem has been fixed in the latest 10.1 Service Pack available at: 

http://www.xilinx.com/support/download/index.htm
The first service pack containing the fix is 10.1 Service Pack 3.

AR# 31076
Date Created 06/04/2008
Last Updated 05/22/2014
Status Archive
Type General Article