UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31204

10.1 iMPACT - When I assign a .RBT or .bit file to my Spartan-3A device I cannot choose programming properties In SVF mode

Description

When I assign a <file_name>.RBT file to my Spartan-3A XC3S700A device, I cannot choose programming properties. All the options in the "Set Programming Properties" are greyed out. How can I work around this issue?

Solution

This issue will be resolved in iMPACT 10.1 Service Pack 3. If you need a specific SVF file with Specific Programming Properties set before this is released, please open an online WebCase with Xilinx Customer Support at: 

http://www.xilinx.com/support/clearexpress/websupport.htm

AR# 31204
Date Created 06/18/2008
Last Updated 05/22/2014
Status Archive
Type General Article