UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31225

10.1 ISE - Sourcing a Project Navigator-Generated Tcl script returns: "can't read "myScript": no such variable"

Solution

The generated script references a Tcl variable ($myScript) that is not created in the script.

The top lines of the script look like the following:

#

# set_process_props

#

# This procedure sets properties as requested during script generation (either

# all of the properties, or only those modified from their defaults).

#

puts "$myScript: setting process properties..."

The "$myScript:" can be removed from the line shown to make the script run correctly.

This problem has been fixed in the latest 10.1 Service Pack available at:

http://www.xilinx.com/support/download/index.htm
The first service pack containing the fix is 10.1 Service Pack 2.

AR# 31225
Date Created 06/19/2008
Last Updated 07/20/2010
Status Archive
Type General Article