UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31229

10.1 EDK - BSB-generated designs for Spartan-3-1600E board do not work

Description

When BSB is used to create a design with 100 Mhz clock frequency, the system does not work after BSB completes.

Solution

Although a 100 MHz clock is defined in the XBD file, Base System Builder does not connect the clock to the SMA connector. To work around this issue, the user should connect a clock signal to the SMA connector.

AR# 31229
Date Created 07/10/2008
Last Updated 05/21/2014
Status Archive
Type General Article