We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31439

Spartan-3A/3AN - SVF programming fails when I use the 1532 flow with an .isc file as my programming file


When I generate an SVF file targeting a Spartan-3/3AN part using the 1532 flow, it fails to configure my device. The file plays successfully but there is no effect on the device. INIT stays high, DONE stays low and a Status Register Read of the device shows "Sync Word Not Found : 1."


If you need further assistance with this problem, please open an online WebCase with Xilinx Customer Support at:


AR# 31439
Date 12/15/2012
Status Active
Type General Article
Page Bookmarked