UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31563

10.1 EDK - When I generate a VxWorks BSP for the Power PC 440, not all of the necessary files are copied into the BSP directory

Description

When I generate a VxWorks BSP for the Power PC 440, not all of the necessary files are copied into the BSP directory. Is a work-around available?

Solution

The work-around is to specify a high address for the IDCR. If the IDCR high address is not listed in the MHS 440 parameters, the files will not get copied over. 

 

1. Open the MHS file. 

2. In the Power PC 440 section, add PARAMETER C_IDCR_HIGHADDR = 0b0011111111 

3. Save and close the MHS file. 

 

This problem is scheduled to be fixed in the next major release of the EDK design tools.

AR# 31563
Date Created 08/26/2008
Last Updated 05/21/2014
Status Archive
Type General Article