UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31629

10.1 iMPACT/Proj Nav - When I re-target a new device in my ISE project and run the "Configure Target Device", Project Navigator crashes

Description

When I re-target a new device in my ISE project and run the "Configure Target Device", Project Navigator crashes. I see the following error: 

 

"FATAL_ERROR:GuiUtilities:Gq_Application.c:590:1.20" 

 

This occurs when I have run implementation and created an iMPACT project file (.ipf). After I rerun implementation and select the "Configure Target Device" process, the Project Navigator GUI crashes.

Solution

The work around is to delete the created .ipf file in the project directory after re-targeting a new device. A new .ipf file will then be created. This issue will be resolved in ISE 11.1.

AR# 31629
Date Created 09/09/2008
Last Updated 05/23/2014
Status Archive
Type General Article