UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 31689

10.1 EDK SP3, xps_ll_temac_v1_01_b - Tactical patch to implement SGMII or 1000 Base-X systems on Virtex-5 FXT devices

Description

I receive the following error while implementing my SGMII or 1000 Base-X design in EDK 10.1sp3. The design worked fine until sp2.

ERROR:PhysDesignRules:1742 - Unsupported GTX_DUAL programming for comp

Hard_Ethernet_MAC/Hard_Ethernet_MAC/V5HARD_SYS.I_TEMAC/SINGLE_1000BASEX_FX.I_EMAC_TOP/GTX_DUAL_1000X_inst/GTX_1000X/t

ile0_rocketio_wrapper_gtx_i/gtx_dual_i. The OOBDETECT_THRESHOLD_0 general config data setting 001 is not supported.

The allowed values for OOBDETECT_THRESHOLD_0 are 110 and 111. Please re-generate this component in the latest version

of Coregen to fix this error. If the error persists, please open a case with Xilinx Technical Support to report this

problem.

ERROR:PhysDesignRules:1742 - Unsupported GTX_DUAL programming for comp

Hard_Ethernet_MAC/Hard_Ethernet_MAC/V5HARD_SYS.I_TEMAC/SINGLE_1000BASEX_FX.I_EMAC_TOP/GTX_DUAL_1000X_inst/GTX_1000X/t

ile0_rocketio_wrapper_gtx_i/gtx_dual_i. The OOBDETECT_THRESHOLD_1 general config data setting 001 is not supported.

The allowed values for OOBDETECT_THRESHOLD_1 are 110 and 111. Please re-generate this component in the latest version

of Coregen to fix this error. If the error persists, please open a case with Xilinx Technical Support to report this

problem.

ERROR:Pack:1642 - Errors in physical DRC.

Mapping completed.

See MAP report file "system_map.mrp" for details.

Problem encountered during the packing phase.

Design Summary

--------------

Number of errors : 3

Number of warnings : 33

ERROR:Xflow - Program map returned error code 2. Aborting flow execution...

make: *** [__xps/system_routed] Error 1

Done!

Solution

The solution is to use modified wrapper files which are available in this patch. These files have the GTX parameters OOBDETECT_THRESHOLD_0 and OOBDETECT_THRESHOLD_1 changed from "001" to "111".

This patch is required only for a Virtex-5 FXT 1000BaseX or SGMII TEMAC design in the system.

1. Download the XPS_LL_TEMAC v1.01.b patch at:

http://www.xilinx.com/txpatches/pub/swhelp/ip_updates/ar31689_xps_ll_temac_v1_01_b_patch.zip

2. Unzip the contents of the patch to the pcores folder of the project.

<Project>\pcores

3. Clean the project after installing the patch and then re-implement it.

AR# 31689
Date Created 09/19/2008
Last Updated 12/15/2012
Status Active
Type General Article